If your two-handle bathtub faucet is not working correctly, you can follow these steps to replace it. First, you need to disassemble it. Then, remove the old valves. You can then install the new ones. Once you have finished, you can turn the water on and check for leaks.
Table of Contents
Installing new valves in a two-handle bathtub faucet
The first step in replacing the two-handle bathtub faucet valves is to remove the old valve cartridge. A small flathead screwdriver can be used to loosen the cap. Then, remove the old cartridge and replace it with the new one. Be sure to keep the parts in a plastic bag.
You will need a kit that includes the replacement valve to install new valves. The kit should come with the necessary tools. Usually, you will need an adjustable wrench and a valve wrench. Once you have the parts, you can replace the faucet. Follow instructions to avoid flooding the bathroom or damaging the wall.
If you do not know how to install the new valve, hire a plumber to do the job. Plumbing contractors in the Indianapolis area can help you install new shower valves and improve the function of your home plumbing fixtures. Different faucets come with different valves, so you must consult a plumber for help choosing the correct valve.
Adapter for slip-on spout
If you’re looking to replace the two-handle bathtub faucet with a slip-on spout, follow a few simple steps. The first step is to remove the old tub spout. To do this, turn the spout counterclockwise until it comes off. Then, unscrew the adapter from the tub and hold it with two hands. Be careful not to over-tighten the adapter; you don’t want to dent the finished wall surface.
The next step is to install the new spout. First, measure the length of the pipe coming from the wall. You want it to be a minimum of one inch and two-and-a-half inches. You also want to make sure the length matches the spout’s manufacturer’s specifications. You may need an adapter or a new tub spout if it’s shorter or longer.
You can purchase a new spout for around $10 to $20 at home centers and hardware stores. However, before you begin replacing the spout, you need to determine the type of spout you want to replace. There are two types of spouts: screw-on and slip-on.
Removal of old valves
The first step in replacing a two-handle bathtub faucet involves removing the old valve. You can purchase a handle puller at a local hardware store for $9-15. You will also need a 5/8-inch deep socket wrench. You can use this wrench to loosen the old valve by turning it clockwise. Once the old valve is removed, you can replace it with a new one by screwing it. Once the new valve has been installed, turn on the water to ensure that the water is flowing correctly.
If the old valves are hard to remove, use an adjustable wrench to remove them. You can also use penetrating oil to loosen stubborn fittings. Before replacing the valves, make sure that you have a drop cloth under the faucet. Once you have removed the old valve, save the stem so it can be replaced with the new one.
Next, remove the escutcheon and the flat plate surrounding the handle. Then, you can remove the chrome sleeve. You can also remove the cartridge retaining clip with a small screwdriver.
Repairing or replacing a tub and shower faucet
Before attempting to repair or replace a two-handle bathtub and shower faucet, turn off the water supply in the house at the main shutoff valve and each fixture individually. Next, unplug the hot and cold hoses from the fixture. Stem nuts connect these hoses. You can loosen these nuts with channel-locking pliers. If you cannot remove these nuts, use a screwdriver.
There are hundreds of different styles of bathtub and shower faucets. Try to match the parts with the original to make the repair easier. If you don’t have the exact part, you can buy replacement parts online or in a plumbing supply center, which sells plumbing supplies to plumbers.
Before you begin, make sure you have the right tools. Depending on the model of your faucet, you may need specialized tools. For example, an Allen or strap wrench helps remove a hard-to-remove handle.
