Take a fresh look at your lifestyle.

How to Clean Laminate Floors

19

The best way to clean laminate floors without damaging them is to use warm, not hot, water. This will avoid streaking and allow the floor to air dry. Do not use vinegar or acetone, which can damage the surface. Instead, use a baby shampoo that is mild enough to avoid scratching. The baby shampoo contains only water and is safe for laminate floors.

Avoid sanding or refinishing laminate floors.

If you’ve had laminate floors for years and want to spruce them up, there are several options that you can use to update them. One popular option is painting. First, however, it’s essential to use the correct techniques and products. Often, a primer is necessary before you can paint directly on the surface.

Before painting a laminate floor, removing the protective layer is essential. If you leave this layer, it will prevent the paint from adhering correctly. Next, you’ll need to sand the floor lightly. You’ll need to be gentle when doing this, as you don’t want to create holes in the floor. Also, the paint won’t adhere well if the surface is scuffed.

Avoid abrasive scrubbers

When cleaning laminate floors, avoid using abrasive scrubbers and pads. These materials can damage the floor and leave a waxy buildup that is hard to remove. Instead, use a soft, lint-free cloth or microfiber. In addition, avoid using abrasive cleaning tools such as steel wool, Murphy Oil Soap, or baking soda.

When scrubbing laminate floors, be sure to dry mop the surface first. This will help remove troublesome messes and leave your floors clean and shiny. If you must use a scrubbing tool, use a microfiber mop and avoid using abrasive scrubbers.

Avoid acetone

It is essential to avoid acetone when cleaning laminate floors, as it can severely damage them. It can also void the warranty of the flooring. If you do want to use acetone, dilute it with water before using it to clean your floors. And make sure to ventilate your workspace well to avoid exposure to toxic fumes. Also, avoid using the cleaning solution on floors with painted finishes.

Acetone is an inexpensive and highly effective stain remover, but you should avoid using it on laminate floors because it can damage the sealant on your flooring. It is also highly toxic and flammable. It also causes various health effects, so it is always best to use it carefully.

Avoid vinegar

While you may think that using vinegar to clean laminate floors is a good idea, this acidic substance is not safe for all types of flooring. To prevent damage, you should dilute the vinegar with water. You can also put the mixture in a spray bottle. For the best results, diluted vinegar should be applied in small sections over the floor.

There are many types of vinegar-based cleaners on the market. It would help if, yHowever, you used bottled or filtered water when mixing a cleaning solution with vinegar. Tap water contains dissolved minerals, which can leave streaks on laminate floors.

Avoid baby shampoo

You may be tempted to use baby shampoo if you’re trying to clean laminate floors. This gentle cleanser is safe for laminate floors and is recommended by many flooring companies. Use a small amount of the solution and a sponge mop to wipe off the floor, leaving the surface slightly damp. You can air-dry the area afterward without damaging the laminate.

Another option is rubbing alcohol. This solution will remove tough stains in a few minutes. However, you must be careful, as rubbing alcohol can strip the protective top coat from laminate floors.

Avoid scrubbing with steel wool.

It’s important to avoid scrubbing laminate floors with steel wool. Although this type of steel wool is used to remove hardened marks, it’s not a good idea to scrub laminate floors with this material. Instead, it would help if you used a plastic scraper, such as an old credit card, to remove stubborn stains. After cleaning, wipe the area dry with a soft cloth.

Another option is using a steam mop, but be careful not to use too much water. If you want to use a steam mop, use it on only a small area. Avoid using steel wool, vinegar, or other harsh chemicals. To restore the shine of laminate floors, you can use rubbing alcohol or vinegar. Avoid using ammonia, as it can strip the top coat from the laminate floor.